Quick Answer: How Can I Enter BIOS If F2 Key Is Not Working?

How do I get into BIOS on my desktop?

Method 2: Use Windows 10’s Advanced Start MenuNavigate to Settings.Click Update & Security.Select Recovery in the left pane.Click Restart now under the Advanced startup header.

Your computer will reboot.Click Troubleshoot.Click Advanced options.Click UEFI Firmware Settings.Click Restart to confirm..

Why does my PC turn on but no display?

If your computer starts but displays nothing, you should check is if your monitor is working properly. Check the power light of your monitor to verify that it’s turned on. If your monitor won’t turn on, unplug the power adapter of your monitor, and then plug it back into the power outlet.

Why is my BIOS not showing up?

You may have selected the quick boot or the boot logo settings accidentally, which replaces the BIOS display to make the system boot faster. I’d most probably try to clear the CMOS battery (removing it and then putting it back in).

How do you reset BIOS?

You can do this on most computers from the BIOS page; however, if you’re locked out of your computer’s BIOS, you’ll need to reset the BIOS by opening your computer’s housing and removing the CMOS battery from the motherboard, or–in the case of desktops–resetting the jumper switch on the motherboard.

How do I change my BIOS to UEFI?

Instructions:Open Command Prompt with administrator privileges.Issue the following command: mbr2gpt.exe /convert /allowfullOS.Shut down and boot into your BIOS.Change your settings to UEFI mode.

What is UEFI mode?

The Unified Extensible Firmware Interface (UEFI) is a specification that defines a software interface between an operating system and platform firmware. … UEFI can support remote diagnostics and repair of computers, even with no operating system installed.

How do I boot into UEFI?

Select UEFI Boot Mode or Legacy BIOS Boot Mode (BIOS)Access the BIOS Setup Utility. Boot the system. … From the BIOS Main menu screen, select Boot.From the Boot screen, select UEFI/BIOS Boot Mode, and press Enter. … Use the up and down arrows to select Legacy BIOS Boot Mode or UEFI Boot Mode, and then press Enter.To save the changes and exit the screen, press F10.

What key do I press to enter BIOS?

Common keys to enter the BIOS are F1, F2, F10, Delete, Esc, as well as key combinations like Ctrl + Alt + Esc or Ctrl + Alt + Delete, although those are more common on older machines. Also note that a key like F10 might actually launch something else, like the boot menu.

How do I force open BIOS?

To boot to UEFI or BIOS:Boot the PC, and press the manufacturer’s key to open the menus. Common keys used: Esc, Delete, F1, F2, F10, F11, or F12. … Or, if Windows is already installed, from either the Sign on screen or the Start menu, select Power ( ) > hold Shift while selecting Restart.

How do I get into BIOS without UEFI?

If you are trying to get into BIOS, then hold down the shift key when you click on shutdown in the power icon options and that will bypass Windows 10 fast startup and shut down the computer to the absolute power off state.